No products in the cart.
IR Infrared Wireless Remote Controller for Pentax KR KX KM K7 K5
It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb).
It can be easily attached to your camera belt. Works from up to 8 meter (25 feet) away.
Dimension: 60 x 28 x 6 mm
Digital SLR *ist DL *ist DS *ist D K100
K110 K10D K20D K100D K200D K2000 K-m K7
Optio S S4 S4i S5i S5n
SV 330 430 450 550 555 750z S50 S40
Film SLR *ist MZ6 MZ-L ZX-L
For the first time use. please pull out the plastic separator at the battery holder.
Mount the camera on a tripod or place the camera on a stable, level surface.
Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infraed receiver is not blocked by the lens or other obstacles).
How the camera focuses and shoots depends on the option selected camera's custom setting.For futher information,check your camera's manual.
Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.
1 x IR Wireless Remote Controller
1 x Lithium CR2025 battery (inside)