No products in the cart.
New ARCHON V10S CREE XM-L U2 860LM Professional Diving LED Flashlight
|Product name:||ARCHON V10S CREE XM-L U2 Diving LED Flashlight|
|Emitter Type:||XM-L U2|
|Material:||Durable Aircraft-grade Aluminum|
|Battery Configurations:||1 X 18650 battery(not included)|
|Switch Location:||body side of the flashlight|
|Impact Resistant||1.5 M|
|Runtime:||High: 2.5 hrs Low: 4.0 hrs, SOS: 3.0hrs|
|Waterproof:||Waterproof diving 60meters|
|Color:||red,blue and black|
|Size:||137.7 x 29mm (length x diamter)|
1. Remove the light body by turning counter-clockwise.
2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the light body by turning clockwise.
ON/OFF AND MODES CHANGING
Click the switch to activate the light.
Successive switch ON-OFF to cycle through high, low, SOS, Off.
BATTERY STATUS INDICATOR:
Light ring around the switch: Above 70% Blue; 70%-40% Green; Below 40%-10% Red; Below 10% Red; Strobe, Below 5% OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.
1 x ARCHON V10S CREE XM-L U2 Diving LED Flashlight
1 x carrying strap
1 x o-rings
Color Black, Color Blue, Color Red